Section 3: Operational Safety Information; Section 4: Maintenance Information - Xerox X76007D-WU User Manual

Section 3: Operational Safety Information

Section 4: Maintenance Information

74
Your Xerox equipment and supplies have been designed and tested to
meet strict safety requirements. These include safety agency
examination, approval, and compliance with established environmental
standards.
To ensure the continued safe operation of your Xerox equipment, follow
these safety guidelines at all times:
Do These
• Always follow all warnings and instructions that are marked on or
supplied with the equipment.
• Before cleaning this product, unplug the product from the USB port.
Always use materials specifically designated for this product, the use
of other materials may result in poor performance and create a
hazardous situation. Do not use aerosol cleaners, they may be
explosive and flammable under certain conditions.
• Always exercise care when moving or relocating equipment.
• Always locate the machine on a solid support surface that has
adequate strength to support the weight of the machine.
NOTE: Your Xerox machine is equipped with an energy saving device
to conserve power when the machine is not in use. The machine may be
left on continuously.
Do Not Do These
• Never attempt any maintenance function that is not specifically
described in this documentation.
• Never remove covers or guards that are fastened with screws. There
are no operator serviceable areas within these covers.
• Never locate the machine near a radiator or any other heat source.
1. Any operator product maintenance procedures will be described in
the user documentation supplied with the product.
2. Do not carry out any maintenance on this product which is not
described in the customer documentation.
3. Do not use aerosol cleaners. The use of cleaners that are not
approved may cause poor performance of the equipment, and could
cause a dangerous condition.
4. Use supplies and cleaning materials only as directed in this manual.
5. Do not remove covers or guards that are fastened with screws. There
are no parts behind these covers that you can maintain or service.
6. Do not perform any maintenance procedures unless you have been
trained to do them by an authorized local dealer or unless a
procedure is specifically described in the user manuals.
Xerox 7600 Scanner User's Guide