Editing Or Deleting Scan Configurations - Xerox X76007D-WU User Manual

Editing or Deleting Scan Configurations

Xerox 7600 Scanner User's Guide
Editing and deleting is normally for the configurations you create, not for
your scanner's pre-set configurations.
NOTE: Your scanner comes with a number of configurations pre-set at
the factory. To ensure that your scanner will always have a set of
correct scan configurations, do not delete the pre-set configurations.
We also recommend that you keep those configurations locked so they
are not inadvertently deleted. That way, you will always have the
factory-settings available. If you do delete or edit them, and want to get
the factory pre-sets back again, you will need to uninstall then re-install
your scanner.
To edit or delete a scan configuration:
1. Open the One Touch Properties window.
2. Select the scan configuration you want to edit or delete.
• To delete the configuration, click the Delete button.
• To edit the configuration, click the Edit button.
Edit the settings and click OK.
3. Click OK to close the One Touch Properties window.
Scanning
Select the scan
configuration to edit or
delete. It must be
unlocked, as indicated
by not having a lock
displayed here.
29