Handlebar; Brakes - GAS GAS FSE 400 - 2004 Service Manual

Apply oil to the side of the rollers so that it will penetrate to the rollers
and bushings. Wipe off any excess oil.

HANDLEBAR

To suit various riding positions, the handlebar position can be adjusted
front to rear.
Handlebar Position Adjustment
(B)
Loosen the handlebar holder nuts (B), turn about the handlebar
holder (A), and tighten the nuts securely.
Tighten the clamp bolts, front first and then the rear, to 25 Nm of
torque (18 ft.lbs). If the handlebar clamp is correctly installed, there
will be an even gap at the front and rear after tightening (A).
(A). Apply oil

BRAKES

Disc and disc pad wear is automatically compensated for and has
no effect on the brake lever or pedal action. So there are no parts
that require adjustment on the brakes except brake lever play and
(A) brake pedal position.
92
EC FSE 2004 - -
(A)