GAS GAS FSE 400 - 2004 Service Manual page 33

Table of Contents

Advertisement

CAUTION
The left and right fork tubes must bealigned (level) at the top clamps.
(see the illustration).
Compression Dampening Adjustment
- To adjust, turn the knob located at the top of the fork. Adjust to
rider preferance.
Oil level Adjustment
- Using the stand under the frame, stabilize the motorcycle.
- Place a stand or block under the engine so that the front wheel is
raised off the ground.
- Remove the front fender and front disc cover.
- Unbolt the brake hose holder mounting bolts.
- Remove the front fork protectors.
- Remove the handlebar clamp bolts and remove the handlebar.
- Remove the top clamps of the forklegs.
- Let the forks completely compress.
- Raise the fork springs from the fork.
- Grasp the top casps and loosen the clck nuts on the caps.
- Remove the caps from the fork legs.
- Remove the fork springs.
- Put the oil level gauge on the top of the fork tube, and measure
the distance from the top of the fork tube to the oil level.
Stand Oil Level
Marzocchi: 110 mm
Adjust the oil level as required within the adjustable range using the
following oil:
MARZOCCHI SAE 7´5
97
EC FSE 2004 -
-
WP: 120 mm
(A). Draining Oil
(B). Filling Oil
WP. SAE 5

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fse 450 - 2004Ec fse 400Ec fse 450

Table of Contents