Grundfos SLV.65.65 Series Installation And Operating Instructions Manual

Grundfos SLV.65.65 Series Installation And Operating Instructions Manual

Advertisement

Quick Links

GRUNDFOS INSTRUCTIONS
SL1.50 and SLV.65
0.9 - 1.5 kW
Installation and operating instructions

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SLV.65.65 Series and is the answer not in the manual?

Questions and answers

Summarization of Contents

General Description
Product Drawings
Visual overview of the SL1.50 and SLV.65 pumps.
Applications
Details the liquids suitable for SL1.50 and SLV.65 pumps.
Operating Conditions
Specifies permissible operating parameters for the pumps.
Delivery and Handling
Transportation
Guidelines for safely transporting the pump.
Storage
Instructions for storing the pump during non-use.
Lifting
Correct methods for lifting the pump.
Identification
Nameplate
Information found on the pump's identification plate.
Type Key
Explains the pump model designation codes.
Approvals
Approval Standards
Lists the standards the pumps comply with.
Explanation to the Ex Approval
Details on explosion-proof certifications and classifications.
Safety
Potentially Explosive Environments
Safety precautions for operating in potentially explosive atmospheres.
Installation
Installation on Auto-Coupling
Step-by-step guide for installing the pump on an auto-coupling system.
Free-Standing Submerged Installation
Instructions for installing the pump freely in a pit.
Electrical Connection
Wiring Diagrams
Illustrates the electrical connection schematics for the pumps.
CU 100 Control Box
Details on the GRUNDFOS CU 100 control box.
Pump Controllers
Information on various GRUNDFOS pump controller options.
Thermal Switches
Explanation of the integrated thermal protection for the motor.
Frequency Converter Operation
Guidelines for operating the pump with a frequency converter.
Starting Up the Product
General Startup Procedure
Step-by-step instructions for the initial startup of the pump.
Operating Modes
Description of intermittent (S3) and continuous (S1) operating modes.
Direction of Rotation
Procedure for checking and correcting the pump's direction of rotation.
Maintenance and Service
Inspection
Recommended inspection points and intervals for the pump.
Adjusting the Impeller Clearance
Procedure for adjusting the impeller clearance on SL1 pumps.
Cleaning the Pump Housing
Instructions for dismantling, cleaning, and reassembling the pump housing.
Checking/Replacing the Shaft Seal
Steps for checking and replacing the shaft seal.
Oil Change
Procedure for draining and refilling the pump's oil chamber.
Service Kits
List of available service kits for the pumps.
Contaminated Pumps
Guidelines for handling pumps used with hazardous liquids.

Table of Contents