Rear/Bottom Panel - Sony LMD1750W Operating Instructions Manual

*9 The signal can only be selected in the main display.
(See "SUB INPUT SELECT" on page 25.)

Rear/Bottom Panel

4 5
qa
a a/? (power) switch
The power is turned on or off.
The monitor is turned on by pressing side ?.
b AC IN socket
Connect the supplied AC power cord.
c DC 12V IN connector
Plug the DC 12V power supply to this connector to
provide power to the monitor.
d AUDIO L/R IN connectors (RCA phono jack)
Connect to the audio outputs of a VCR or to an audio
mixer.
e COMPOSITE IN connector (BNC)
Input connector for composite signals.
f Y/C IN connector (4-pin mini-DIN)
Input connector for Y/C signals.
g G/Y IN connector (BNC)
Input connector for G of RGB signals and component Y
(luminance) signals.
6 7 8 9 0
qs
*10 When a BKM-244CC is installed, closed captions
are displayed.
1 2 3
qd
qf qg qh qj
h B/P
IN connector (BNC)
B
Input connector for B of RGB signals and P
difference) of component signals.
i R/P
IN connector (BNC)
R
Input connector for R of RGB signals and P
difference) of component signals.
j EXT SYNC IN/OUT (external sync) connectors
(BNC)
To use the external sync signal, press the function button
that EXT SYNC is assigned (F1 button at the factory
setting).
IN connector
When this unit operates on an external sync signal,
connect the reference signal from a sync generator
to this connector.
Note
When inputting a video signal with the jitters, etc.
the picture may be disturbed. We recommend
using the TBC (time base corrector).
Location and Function of Parts and Controls
qk
(blue color
B
(red color
R
11