Remote Menu - Sony LMD1750W Operating Instructions Manual

Operating instructions
Hide thumbs Also See for LMD1750W:
Table of Contents

Advertisement

Submenu
INPUT SELECT
OPTION AUDIO
SETTING

REMOTE menu

REMOTE
PA R A L L E L R E M O T E :
S E R I A L R E M O T E :
M O N I T O R :
C O N T R O L L E R :
C O N N E C T I O N :
28
Adjustment Using the Menus
Setting
Selects the input audio signal.
• ALL: The sound except from
BKM-220D and BKM-
243HS is output.
• COMPOSITE: When the
COMPOSITE button is
pressed, the sound is output.
• Y/C: When the Y/C button is
pressed, the sound is output.
• RGB: When the RGB button is
pressed, the sound is output.
• COMPONENT: When the
COMPONENT button is
pressed, the sound is output.
• HD15: When the HD15 button is
pressed, the sound is output.
• DVI: When the DVI button is
pressed, the sound is output.
When BKM-220D/243HS/244CC
is installed, set the audio channel
for each adaptor.
CH1, CH2, CH1+CH2, CH3, CH4,
CH3+CH4, CH5, CH6, CH5+CH6,
CH7, CH8, CH7+CH8, CH9,
CH10, CH9+CH10, CH11, CH12,
CH11+CH12, CH13, CH14,
CH13+CH14, CH15, CH16,
CH15+CH16, OFF
You can display the L/R audio
levels of the selected channels on
the display when the multi display
is enabled.
xxxxxxx
xxx
Submenu
Setting
PARALLEL REMOTE
Selects the PARALLEL REMOTE
connector pins for which you want
to change the function.
You can assign various functions to
1 to 4 pins and 6 to 8 pins. The
following lists the functions you
can assign to the pins.
• – – – ("– – –": No function is
• COMPOSITE
• Y/C
• RGB
• COMPONENT
• DVI
• HD15
• OPTION A-1
• OPTION A-2
• OPTION B-1
• OPTION B-2
• OVERSCAN
• FULL
• NORMAL
• NATIVE
• 4:3
• 16:9
• TALLY R
• TALLY G
• EXT SYNC
• BLUE ONLY
• MONO
• H/V DELAY
• 16:9 MARKER
• 15:9 MARKER
• 14:9 MARKER
• 13:9 MARKER
• 1.85:1 MARKER
• 2.35:1 MARKER
• 1.85:1 & 4:3 MARKER
• 4:3 MARKER
• CENTER MARKER
• SAFE AREA 80%
• SAFE AREA 85%
• SAFE AREA 88%
• SAFE AREA 90%
• SAFE AREA 93%
• MARKER MAT HALF
• MARKER MAT BLACK
Notes
• If you use the PARALLEL
REMOTE function, you need to
connect cables. For more details,
see page 32.
• Set MARKER ENABLE
(page 24) to ON to control the
aspect marker, center marker or
safe area marker.
assigned.)

Advertisement

Table of Contents
loading

Table of Contents