ASCOM OFFICE150 Manual page 8

Installation and putting into service
Installing the battery
1. Hold the handset with the clip facing downwards and insert the battery.
2. Press the battery and handset firmly together (see Figure) and slide the two locks
outwards.
Charging the battery
The battery is delivered uncharged. To charge the battery, you must place the handset on
the charging base. If there is a second battery available, it can be charged without the
handset being in the charging base. In the meantime the other can be used to operate
the handset.
LED display on the charging base:
• red =
• green =
One battery charge lasts
Charging takes
20310997en_ba_a0
The battery is being charged
The battery is charged
for approx.
for approx.
approx.
unlocked
80 hours of standby or
8 hours of talk time
1 hour
locked
7