Operation And Display Elements - ASCOM OFFICE150 Manual

Operation and display elements

Special display symbols
20310997en_ba_a0
Charge state of battery pack
Not displayed:
Blinking display:
Blinking +
warning tone:
Antenna symbol
Not displayed:
Continuous display:
Continuous display:
Blinking:
Blinking:
Continuous display:
Supplementary information (accessed by pressing i-key)
A function stored under the Hotkey/Foxkey is active or the vibrator
is active.
Further menus (trigger with M-key)
Microphone switched off
Programming mode
Continuous display:
Blinking:
Charge is ok, handset is ready for operation
Charge is low (warning)
Charge is very low
Outside of radio coverage range
Ready for incoming and outgoing calls
Handset is registered and ready for operation
in system A (B, C, or D).
Handset is not ready for operation.
Handset is not registered in any system.
Alpha dial feature is activated
Connection made
Visual signal indicating a call always present!
1