Related Manuals for Zodiac Edenpac 8
Summarization of Contents
General Information and Delivery
Delivery, Storage, and Handling
Delivery risks, storage, and handling precautions for the unit.
Voltage Verification
Checking appliance voltage against mains voltage before operation.
Water Quality Parameters
Recommended water parameters (chlorine, bromine, pH) for optimal appliance performance.
Product Description
Unit Overview and Contents
Overview of the unit and its contents after unpacking.
Edenpac 1-5 Component Identification
Detailed diagram and components of Edenpac models 1, 2, 3, 4, and 5.
Edenpac 6 Component Identification
Detailed diagram and components of Edenpac model 6.
Edenpac 7-8 Component Identification
Detailed diagram and components of Edenpac models 7 and 8.
Edenpac 1-5 Dimensions and Weight
Overall dimensions and weight of Edenpac 1, 2, 3, 4, and 5 models with packaging.
Edenpac 6-8 Dimensions and Weight
Overall dimensions and weight of Edenpac 6, 7, and 8 models with packaging.
Installation Guide
Required Installation Tools
List of tools required for installation.
Site Selection Criteria
Guidelines for choosing the appliance installation site, clearances, and base requirements.
Accessing the Electric Card
Steps to access the electrical control panel on the Edenpac single-fan unit.
Hydraulic Connection Setup
Connecting water inlet/outlet and bypass circuit setup for Edenpac 1-5.
Electrical Connection Requirements
Cable sizing, protection, and terminal configurations for heat pump power supply.
Control Unit Operation
Remote Control and Heating Priority Functions
Connecting remote control for start/stop and heating priority features.
Thermostat Overview and Operation
Overview of the EVK thermostat and its basic operation principle.
Setting the Target Water Temperature
Procedure to set the desired water temperature using the thermostat controls.
Startup and Technical Specifications
Technical Specifications Summary
Table detailing power, current, weight, and acoustic data for Edenpac models.
Operating Conditions and Pre-Startup Checks
Heat pump operating limits and essential checks before starting.
Heat Pump Startup Procedure
Step-by-step guide for starting the heat pump, including filtration and bypass adjustments.
Status Checks and Troubleshooting Guide
Verifying operation and interpreting error messages and fault codes.
Winter Storage Preparation
Instructions for preparing the heat pump for winter storage to prevent damage.
Maintenance and End-of-Life
Annual Maintenance Procedures
Essential maintenance tasks to be performed annually by qualified personnel.
Wiring Diagrams
Single-Phase EdenPAC Wiring Diagram
Wiring diagram for single-phase EdenPAC models.
Three-Phase EdenPAC Wiring Diagram
Wiring diagram for three-phase EdenPAC models.
Safety and Compliance Recommendations
PED Installation and Maintenance Guidelines
Recommendations related to the Pressurised Equipment Directive (PED).
Repair Safety and Component Guidelines
Guidelines for repair procedures, safety regulations, and spare parts.
Product Conformity and Standards
Statement of compliance with EMC and Low Voltage directives.
Appliance End-of-Life Management
Disposal and Recycling Procedures
Guidelines for disposing of or recycling the appliance at the end of its working life.
Need help?
Do you have a question about the Edenpac 8 and is the answer not in the manual?
Questions and answers