You will need the following tools for OmniLine preparation and installation.
Tool
Building arrays
Screwdriver
Allen Key/Socket Set
Open Ended Spanner
Screwdriver
4 Cab Bracket
Allen Key/Socket Set
Allen Key/Socket Set
Allen Key/Socket Set
Open Ended Spanner
8 - 16 Bracket
Allen Key/Socket Set
Allen Key/Socket Set
Allen Key/Socket Set
Open Ended Spanner
Pliers
Open Ended Spanner
Flying Bracket
Allen Key/Socket Set
Allen Key/Socket Set
PZ = Pozidrive
All material © 2009. Martin Audio Ltd. Subject to change without notice.
Size
Operation
PZ1
Rear covers removal/assembly
4
Link Plates assembly
10mm
Link Plates assembly
S3
Wiring
5
Adding brackets to the array
8
Adding collar
6
Clamping collar
13mm
Clamping collar
5
Adding brackets to the array
8
Adding collar
6
Clamping collar
13mm
Clamping collar
Split pin removal/fitting
8mm
Attaching Dog Grip
5
Adding brackets to the array
6
Adding brackets to the array
S = Straight/Flat head
2
Need help?
Do you have a question about the OMNILINE - SYSTEM PREPARATION and is the answer not in the manual?