Martin Audio OMNILINE - SYSTEM PREPARATION Manual page 2

Martin Audio Omniline
Notes:
A variety of mounting and suspension systems are available. Make sure you
have ordered the required wall mounting or suspension kit to suit your chosen
installation method. See section 4 for kit details...
Martin Audio Omniline® loudspeakers must be installed by experienced
loudspeaker installation personnel using the full installation kit provided
It is the installer's responsibility to ensure that all relevant local, national and
international electrical, fire and building safety regulations are complied with
Every Omniline® loudspeaker must be fitted with a steel safety wire this can
be fitted between an attachment bracket (provided) and a suitable supporting
structure.
All material © 2009. Martin Audio Ltd. Subject to change without notice.
®
system preparation
1