Related Manuals for Hantek IDSO1070A
Summarization of Contents
General Safety Summary
Safety Information
Details important safety information and system symbols for correct and efficient operation.
System Symbols
Explains various safety symbols used in the manual and on the instrument.
System Terms
Defines key terms like Danger, Warning, and Notice for clear understanding of hazards.
Chapter 1 Quick Start
Connections and Indications
Details the instrument's ports, connectors, and indicator lights for proper identification.
Set Connection Mode
Explains how to establish connectivity between the IDSO and PC/tablet via Wi-Fi or USB.
Charging the battery
Provides instructions on how to charge the internal rechargeable battery of the IDSO.
General Check
Outlines steps for inspecting the oscilloscope and its accessories after receiving it.
Probe Compensation
Describes the process of compensating oscilloscope probes for accurate measurements.
Function Check
Details how to perform a functional check to ensure the oscilloscope is operating correctly.
Self Calibration
Explains the self-calibration routine for optimizing measurement accuracy.
Chapter 2 PC Application
Install Software
Guides users through the process of installing the oscilloscope software on a Windows PC.
Install Driver
Provides instructions for installing the necessary driver for the IDSO to communicate with a PC.
Set Connection Mode with PC
Explains how to connect the IDSO to a PC using USB or Wi-Fi.
The User's Interface
Describes the graphical user interface of the PC software application.
The Menu System
Details the various menu options available within the PC software.
Setup the Oscilloscope
Explains how to configure the oscilloscope settings via the PC software.
Set Horizontal System
Describes how to adjust horizontal parameters like time base and format.
The Application of the X-Y Operation
Explains how to use the X-Y plot feature for analyzing signal phase differences.
Set Vertical System
Details how to configure vertical parameters like voltage scale and coupling.
Set Trigger System
Explains how to set up trigger conditions for capturing waveforms.
Capturing a Single-Shot Signal
Guides on how to capture transient or single-occurrence events using trigger settings.
Math and FFT
Covers the Math function and Fast Fourier Transform (FFT) capabilities.
Save and Load
Describes how to save and load waveform data, setups, and reference signals.
Set Reference
Explains how to load and save reference waveforms for comparison.
Display System
Explains how to customize display settings like type, grid, and intensity.
Measure System
Details the measurement functions, including scale, cursor, and automatic measurements.
Acquisition Modes
Explains different acquisition modes like Normal and Average.
Utility Function
Covers utility functions like recording, pass/fail tests, and calibration.
Print And Print Preview
Details how to print waveforms and previews.
Chapter 3 IOS Application
User Interface
Describes the graphical user interface of the iOS oscilloscope application.
Menu System
Details the various menu options available within the iOS application.
Connect IDSO With Apple
Explains how to connect the IDSO to an Apple device via Wi-Fi.
Set Horizontal System
Describes how to adjust horizontal parameters on iOS.
Set Vertical System
Details how to configure vertical parameters like voltage scale and coupling on iOS.
Set Trigger System
Explains how to set up trigger conditions on iOS.
Save and Load
Describes saving and loading data on iOS.
Measure Signal
Details measurement functions on iOS.
Acquire
Explains acquisition settings on iOS.
Chapter 4 Android Application
User Interface
Describes the graphical user interface of the Android oscilloscope application.
Menu System
Details the various menu options available within the Android application.
Connect IDSO with Android
Explains how to connect the IDSO to an Android device via Wi-Fi.
Set Vertical System
Details how to configure vertical parameters on Android.
Set Trigger System
Explains how to set up trigger conditions on Android.
Measure Signal
Details measurement functions on Android.
Chapter 5 Appendix
Appendix A: Specifications
Lists the technical specifications of the IDSO oscilloscope.
Appendix B: General Maintenance
Provides guidelines for the general care and maintenance of the device.
Appendix C: Accessories
Lists the standard accessories included with the oscilloscope.
Need help?
Do you have a question about the IDSO1070A and is the answer not in the manual?
Questions and answers