Mirror Mix; Sync Function - Denon DN-HS5500 Owner's Manual

ENGLISH

15 MIRROR MIX

• "Mirror mix" is an effect function by which the Deck 1 and Deck 1 are played with the a track delayed by a specific
amount of time (1/8, 1/4, 3/4, 1/2, 1/1 or 2/1 BPM) with respect to the main track.
DECK1/2
ADD
r,t
AUTO/INPUT BPM
q
LOCK
w,e,y
Setting the BPM
q Use auto BPM, TAP or BPM
1
INPUT to set the BPM during
playback of the main track.
Selecting the mirror mix mode
w Press the MIRROR MIX
2
button and hold it in for over 1
second to set the mirror mix
mode.
Setting the mirror mix playback parameters
e While in the mirror mix mode.
The Deck 2 delay time can
now be set with the
3
PARAMETERS knob.
• When the MIRROR MIX
button is pressed again, the delay time
setting mode turns off.
NEXT FILE B
HOT LIST
OMIT MIRROR
MEMO
PRESET
FAST SEARTCH
DECK1:ORANGE
DECK2:GREEN
Starting mirror mix playback
r With the Deck 1 set to Cue
4
or Play mode, press the
LOCK
Function3 button to start
mirror mix playback.
Stopping mirror mix
playback
t During mirror mix playback,
5
press the Function3 button
to pause mirror mix
playback.
Turning the mirror mix mode
off
y Press the MIRROR MIX
6
button and hold it in for over 1
second to turn the mirror mix
off.
16 D-SYNC FUNCTION
This function allows two independent players to be linked together by a Cross LAN cable (Within Max. 3m) that shares
and controls all your connected devices from the Master device to the Remote device.
Each time the D-SYNC button is pressed, Deck 2 on the set whose D-SYNC button was pressed can be controlled from
the other unit.
1. Connections
Connect two units of DN-HS5500s by Cross LAN cable.
DN-HS5500-A
DECK1 DECK2
DIGITAL
LINE OUT
(PC/MIDI)
With the above connections, when the D-SYNC button on set A is pressed, set A's Deck 2 can be controlled from
set B.
• The set whose D-SYNC button was pressed is called the "Master", the other set the "Remote".
(In the case above, set A is the master, set B the remote.)
• The audio signals are output from the master set. They are not output from the remote set.
DN-HS5500-A (Master)
DECK1 DECK2
DIGITAL
LINE OUT
(PC/MIDI)
q w
With the above connections
The audio output (q) of Deck 1 on set A (Master) is operated from set A (Master).
The audio output (w) of Deck 2 on set A (Master) is operated from set B (Remote).
The audio signals (e) are not output from remote Deck 1.
FADER 1 on the master side operates for the master side.
FADER 2 on the master side operates for the remote side.
About USB devices
In the D-SYNC mode, the USB device connected to the Remote side cannot be used.
23
ENGLISH
DN-HS5500-B
DECK1 DECK2
DIGITAL
LINE OUT
(PC/MIDI)
DN-HS5500-B (Remote)
DECK1 DECK2
DIGITAL
LINE OUT
(PC/MIDI)
e