Denon DN-HS5500 Owner's Manual page 37

• File Export
File Export
q At the top menu in the
Import/Export, turn the
1
PARAMETERS knob and
select "Export".
Press the knob again to enter.
w The unit is set to the export mode.
Select the device to
which the presettings
are to be exported.
2
2 Initialization
Use this procedure to format the internal HDD.
Also use this function to restore the presettings for both
layers to the factory defaults.
• Setting the Initialization mode
At the top menu in the Utility
mode, turn the PARAMETERS
knob and select "Initialization".
Press the knob again to enter.
1
The "Initialization" list is
displayed.
2
• Format (when installed)
Format
q At the top menu in the
Initialization, turn the
PARAMETERS knob and
select "Format".
Press the knob
again to enter.
1
w The unit is set to
the format mode.
✽ Note: This
procedure will
erase all contents
on the Hard Drive,
be careful!
Selecting the device
q The currently connected
devices are displayed on
the left of the screen.
w Turn the
PARAMETERS
2
knob and select the
device to be
formatted.
Press the
PARAMETERS
knob to enter.
A popup confirmation
message appears at
the bottom left of the
screen.
• When "OK" is
selected:
Formatting starts.
3
When formatting
starts, a progress bar is displayed, allowing
you to follow the progress.
• When "Cancel" is selected:
The screen in step 1 reappears.
Canceling is not possible once the formatting
operation starts.
Once formatting is
completed, a popup
confirmation message
asking whether you
want to switch to the
USB device mode
appears.
• When "USB
4
Device Mode" is selected:
If connected to a computer, the set switches to
the USB device mode.
If not connected to a computer, a message
appears.
• When "Cancel" is selected:
The database is created and the screen in step
2 reappears.
32
ENGLISH
ENGLISH
• Factory Default
Factory Default
q At the top menu in the
Initialization, turn the
PARAMETERS knob and
select "Factory
Default".
1
Press the knob
again to enter.
w The unit is set to
the factory default
mode.
A popup confirmation
message appears.
• When "OK" is
selected:
The operation for
2
restoring the set to
the factory defaults
is executed.
To step 3.
• When "Cancel" is selected:
The screen in step 1 reappears.
Once the operation is
executed, the end
screen is displayed.
• If the operation
was successful:
3
"Complete" is
displayed.
• If the operation
has failed:
"Memory Error" is displayed.