Turning On The Power - Denon DN-HS5500 Owner's Manual

ENGLISH
Full display mode
@7
@5
Text display
• The file name, artist name and album name for the
file at which the cursor is set are displayed here.
• The title name is displayed in the text display
section when the cursor is set to a file name, and
the file name is displayed when the cursor is set to
a title name.
@6
D-SYNC mode indicator
• This is displayed when in the D-SYNC mode.
The D-SYNC indicator will only come on when two
DN-HS5500 are connected together by a RJ45
cable.
@7
Playing deck indicators
• These indicate the deck for which the panel
buttons will operate.

5 TURNING ON THE POWER

@6
q Press the power button.
w If the device selected above is not connected, select the device using the procedure shown below.
@5
9
ENGLISH
The display below appears.
• Operation of the device set in the presettings starts.
• If Power On Play is turned on, the playlist selected at "Power On Play" in the presettings is launched.
• Press the DEVICE button.
The device selection screen appears.
Turn the PARAMETERS knob or scratch disc to select the device.
Press the PARAMETERS knob to set the selected device.