Denon DN-HS5500 Owner's Manual page 29

Professional media player & controller
Hide thumbs Also See for DN-HS5500:
Table of Contents

Advertisement

2. Switching to the D-SYNC mode
• Switching to the D-SYNC mode is only possible when a deck other than Deck 1 on the master unit is set to the
stop mode and operation of the master unit is set to Deck 1.
• Switching to the D-SYNC mode is not possible if the remote unit is set to the utility mode, preset mode, USB device
mode, etc.
Example1: When Deck 1 on both sets A and B is being operated
Set A
DECK 1
DECK 2
DECK 1
Playing
Stopped
Stopped
Stopped
Stopped
Stopped
Example2: When set A is operating its own Deck 1 and set B is operating its own Deck 2
Set A
DECK 1
DECK 2
DECK 1
Playing
Stopped
Stopped
Stopped
Stopped
Stopped
3. Display
The display is as shown below in the D-SYNC mode.
Master side display
• When the D-SYNC mode is set while in the dual display mode, the display switches to the single mode.
• The dual display mode cannot be set with the DISPLAY MODE button while in the D-SYNC mode.
4. Canceling the D-SYNC mode
• With playback stopped on the remote side, press the D-SYNC button on the master or remote set to cancel the D-
SYNC mode.
Example:
Master
Remote
Playing
Stopped
The D-SYNC mode is canceled.
Stopped
Stopped
The D-SYNC mode is canceled.
Set B
D-SYNC
DECK 2
Stopped
Switching possible
Stopped
Switching possible
Set B
D-SYNC status
DECK 2
Stopped
Switching possible
Stopped
Switching possible
Remote side display
D-SYNC status
5. Restrictions when in the D-SYNC mode
• Switching the operated layer
When in the D-SYNC mode, the deck cannot be switched with the LAYER button for either the master or remote
set.
• Device selection
It is not possible to select external devices connected to the internal HDD on the remote side.
• Utility mode
When playback is stopped on both the master and remote sets, the utility mode can be selected by pressing the
TIME button on the master side and holding it down for 2 seconds.
• Preset mode
When playback is stopped on both the master and remote sets, the preset mode can be selected by pressing the
MEMO button on the master side and holding it down for 2 seconds.
• Mirror mix mode
The mirror mix mode cannot be selected.
• Memo function
The memo function can be set and canceled in the same way as for normal playback.
24
ENGLISH
ENGLISH

Advertisement

Table of Contents
loading

Table of Contents

Save PDF