Installing The Platter, The Scratch Disc And The Slipmat - Denon DN-HS5500 Owner's Manual

ENGLISH
INSTALLING THE PLATTER, THE SCRATCH DISC AND THE
2
SLIPMAT

(1) INSTALLING THE PLATTER, THE SCRATCH DISC and THE SLIPMAT

• Accessories
q Aluminum Platter ...................................................1
w Scratch Disc...........................................................1
e Slip Mat..................................................................1
r Adaptor (1) .............................................................1
Scratch Disc
Fig. 1
Adaptor (1)
Slip Mat
(Groove side
DOWN)
Platter
Taper Boss
(Motor Unit)
CAUTIONS:
• Do not touch the motor unit.
• Do not turn on the power without the Platter being
mounted.
1. Install the Platter on the taper boss of the motor.
2. Install the Slip Mat on the Platter.
3. Insert D hole of the Scratch Disc on the D shaft of the
Motor.
NOTE: The printed face is located on the Slip Mat side.
4. Insert the Adaptor according to the direction of the
arrow.
NOTE: Please note the direction of insertion.
Scratch Disc
Fig. 2
Adaptor (1)
D shaft
Fig. 3
NOTE:
Please note the position of Platter when you move DN-
HS5500 after Platter is set.
(2) INSTALLATION
Please set up DN-HS5500 horizontally.
(3) INSTALLING THE 7" RECORD ADAPTOR
Your own 7" vinyl record can be installed on this product by using the provided adaptor.
This original design grants you the freedom to use your favorite vinyl record for that ultimate analog turntable feel.
*Make sure the record used is flat and not warped.
• 7" record adaptor accessories
q Adaptor (2) .............................................................1
w Screw (< head) .....................................................3
e Fixing Plate ............................................................1
1. Set Adaptor (2) in the hole of 7" record.
2. Fix Plate with 3 screws. (< head).
3. Insert D hole of the Adaptor (2) on the D shaft of the
Motor.
4. Insert the Adaptor (1) on the Adaptor (2).
Fig. 1
Screw (< head)
Fixing Plate
Adaptor (2)
3
ENGLISH
7" Record
Fig. 2
Adaptor (2)
7" record
NOTE:
Depending on the RECORD you choose, friction with
the Slipmat may not be enough, which can cause an
undesired drag sound.
If so, use a different record that's thicker or heavier.
Adaptor (1)
Slip Mat