Auto Bpm Counter/Effector - Denon DN-HS5500 Owner's Manual

ENGLISH

12 AUTO BPM COUNTER/EFFECTOR

AUTO BPM COUNTER
r
q,w,e,t
AUTO BPM COUNTER
Beats per minute (BPM) of a file is measured automatically and displayed during playback or in Cue standby mode.
Measured BPM values are synchronized with the effector parameters such as: (ECHO/LOOP and FLANGER time)
• When Auto BPM counter is off, pushing the TAP button for 1 second, reactivates the AUTO BPM COUNTER to
turn back on.
• If you change or select a new file, the old BPM is cleared and the Auto BPM counter starts to detect the new file
automatically.
NOTE:
• AUTO BPM COUNTER might not be able to be measured correctly according to the music.
*If this happens, please use the TAP or Manual In feature.
BPM LOCK
The data measured by the Auto
BPM counter is locked.
1
q Push the TAP button once
while Auto BPM counter is
operating.
"BPM Lock" is displayed for 1 second.
TAPPING
The interval when the TAP button
is pushed repeatedly is measured
and BPM is calculated accordingly.
2
w When you push the TAP
button, the Auto BPM counter turns off.
Push the TAP button repeatedly about 5 ~ 10
times according to the beat.
DECK1/2
NEXT FILE B
HOT LIST
ADD OMIT MIRROR
MEMO
PRESET
AUTO/INPUT BPM
LOCK
FAST SEARTCH
DECK1:ORANGE
DECK2:GREEN
MANUAL INPUT
The known BPM can be dialed in directly by the
numerical value.
LOCK
e The BPM manual input mode
is available when the TAP
button is pushed for more
than 2 sec. "Manual In" is
3
displayed is the screen.
r You can input BPM value
directly with the EFFECTS
knob.
LOCK
✽ When you push and turn
the EFFECTS knob, you
may also adjust the ".1"
area.
t When the TAP button is pushed again, the
3
BPM manual input mode is saved and the BPM
is locked to that value.
EFFECTOR
One of the four effects can be selected.
DECK1/2
e,y,!4 , !5
AUTO/INPUT BPM
q,w,r,!3 , !6
t,i
o,!2
ECHO/LOOP
ECHO/LOOP ON
q When the ECHO/LOOP button is
pressed, the echo/loop function
is turned on and the parameter
1
-1
selection mode is set.
*When echo/loop indicator is solid (not
blinking), press the ECHO/LOOP button to set
the parameter selection mode again.
LOCK
Set the parameters
w In the parameter selection
mode, the "ECHO/LOOP"
and "PARAMETERS"
1
indicator flashes and the
-2
echo/loop parameters can be selected with
PARAMETERS knob and EFFECTS Knob.
Echo Feedback level : EFFECTS knob
Echo Delay time : PARAMETERS knob
19
ENGLISH
NOTE:
• If the MP3 or WAV file contains metadata BPM
information, this value is displayed as the default
value and the LOCK icon will appear in the screen.
You may override
AUTO/TAP/MANUAL in as described above.
NEXT FILE B
HOT LIST
ADD OMIT MIRROR
MEMO
PRESET
LOCK
FAST SEARTCH
DECK1:ORANGE
DECK2:GREEN
Select the LOOP mode
When the feedback level is set to the maximum,
loop playback with the specified time begins. File
can be search for and the file/Playlist can be
replaced during loop playback by pressing the Cue
button at this point.
ECHO LOOP FADE OUT
1
-3
• The parameter mode is turned off while the
echo loop is reproducing when the back cue
or NEXT FILE is selected at the parameter
selection mode.
• When the new track is selected and playback
is started, echo loop playback stops by fade
out. An echo loop playback and a normal
playback can be smoothly replaced.
the default TAG by
w,e,y,u,!0 , !1 , !4 , !5