Related Manuals for ESYLUX PD-C 180i/16 Touch plus
Summarization of Contents
Information about this document
Manufacturer address
Provides the company's contact details including address, website, and email.
Product identification
Lists the item numbers and designations for the products covered by the manual.
Highlighted information within the text
Explains formatting conventions used in the document for better readability.
Warnings
Details the meaning of signal words like DANGER, WARNING, and CAUTION.
Basic safety information
Intended use
Specifies the intended indoor use of the detectors and conditions for high humidity.
Liability and damages
Outlines the manufacturer's stance on liability for improper use or modifications.
Safety instructions
Provides critical safety instructions for electrical installation technicians.
Product description
Introduction
Introduces the wall-mounted detectors as passive infrared sensors.
Differences between presence and motion detectors
Explains how presence detectors differ from motion detectors in functionality and application.
Functions and specification
Lists the key features and technical specifications common to both detector types.
Field of detection
Details the horizontal and vertical detection angles and range.
Type plates
Shows and explains the type plates for MD-C and PD-C models, including technical data.
Connection and assembly
Dimensions diagrams
Provides dimensional drawings for different detector models.
Connection
Details connection procedures and safety warnings for MD-C and PD-C models.
Installation
Guides on flush and surface mounting procedures for the detectors.
Warm-up phase
Describes the detector's behavior and readiness after power-up and initial setup.
Touch panel operation
Switching on and off and selecting a program
Explains how to use the touch panel for basic operations and program selection.
Mobil-PDi/MDi remote control
Remote control buttons: overview
Provides an overview of the remote control buttons and their functions in different modes.
Operating the detector
Explains how to operate the detector using specific buttons on the remote control.
Programming the detector
Introduces simple and advanced programming modes for the detector and how to activate them.
Functions of buttons in programming mode
Details the specific functions of remote buttons within simple and advanced programming modes.
Setting program 5
Guides on how to configure Program 5 using the remote control and its parameters.
Setting programs 1 to 4
Explains how to adjust settings for existing programs 1 to 4 using simple programming mode.
Setting the touch commands
Describes how to define allowed touch command combinations for programs.
Setting the detector sensitivity
Details how to adjust the detector's sensitivity to avoid false triggers.
Setting the microphone
Explains how to activate and adjust the microphone sensitivity.
Maintenance
Cleaning
Provides instructions on how to clean the detector safely.
Troubleshooting
Lists common faults and their potential causes and solutions.
Need help?
Do you have a question about the PD-C 180i/16 Touch plus and is the answer not in the manual?
Questions and answers