Connecting The Antenna Terminals - Denon AVR-5800 Operating Instructions Manual

Connecting the antenna terminals

F-type converter plug (attached)
• When using the FM antenna
attach to this apparatus
75 Ω/ohms
COAXIAL
CABLE
FM INDOOR
ANTENNA
(Supplied)
FM ANTENNA
ADAPTER
(Supplied)
• An F-type FM antenna cable plug can be connected directly.
• If the FM antenna cable's plug is not of the F-type, connect using the
included antenna adapter.
AM loop antenna assembly
1 2
Remove the vinyl tie
and take out the
connection line.
4
a. With the antenna
on top any stable
surface.
Mount
b. With the antenna
attached to a
wall.
Installation hole
Mount on wall, etc.
10
DIRECTION OF
BROADCASTING
STATION
FM ANTENNA
FEEDER
CABLE
300 Ω/ohms
300 Ω/ohms
TERMINALS
Connect to the AM
antenna terminals.
3
Bend in the reverse
direction.
AM LOOP ANTENNA
(Supplied)
AM OUTDOOR
ANTENNA
GROUND
FM antenna adapter assembly
Open the cover
SHUT
PULL
CLAMP
CLAMP
PULL
ANTENNA ADAPTER
REMOVE
CLAMP
Connection of AM antennas
1. Loosen by turning 2. Insert the
counterclockwise. cord.
Note to CATV system installer:
This reminder is provided to call the CATV system installer's
attention to Article 820-40 of the NEC which provides
guidelines for proper grounding and, in particular, specifies
that the cable ground shall be connected to the grounding
system of the building, as close to the point of cable entry as
practical.
Notes:
• Do not connect two FM antennas simultaneously.
• Even if an external AM antenna is used, do not disconnect
the AM loop antenna.
• Make sure AM loop antenna lead terminals do not touch
metal parts of the panel.
75 Ω/ohms COAXIAL CABLE
3. Tighten by turning
clockwise.