Dsp Surround Simulation - Denon AVR-5800 Operating Instructions Manual

DSP surround simulation

1 Select the surround mode for the input channel.
DOLBY
SURROUND
DIRECT STEREO
The surround mode switches in the following order each time
the DSP SIMULATION button is pressed:
WIDE SCREEN
JAZZ CLUB
MATRIX
2
Display the surround parameter screen on the monitor.
(Remote control unit)
3
(Remote control unit)
4
Press the CURSOR/PAGE button so that the display is no longer highlighted,
then press the "SURR. PARA" button to complete the setting.
(Remote control unit)
NOTES:
• When "Default" is selected and the jog stick is moved to the left, "CINEMA EQ." and "D. COMP." are automatically set to "OFF". In
addition, "ROOM SIZE" is set to "medium", "EFFECT LEVEL" to "10" and "DELAY TIME" to "30ms".
• The "ROOM SIZE" expresses the expansion effect for the different surround modes in terms of the size of the sound field, not the actual
size of the listening room.
SURROUND MODE
DTS WIDE 5CH / 7CH DSP
SURROUND
SCREEN STEREO SIMULATION
(Main unit)
SUPER STADIUM ROCK ARENA
CLASSIC CONCERT
MONO MOVIE
The screen for the selected surround mode appears.
Press the CURSOR/PAGE button to highlight the
display, then use the jog stick to set the parameters.
1
3
2, 4
49