Denon AVR-5800 Operating Instructions Manual page 30

2
3
This completes system setup. Once these settings are made, there is no need to change them unless different AV components are connected
or the speakers are repositioned.
After completing system setup
This button can be pressed at any time during the system setup process to complete the process.
1
Finally set the remote control unit (RC-8000) display time setting to a time that is short but long enough that operation is possible.
• On-screen display signals
VIDEO signal input jack (yellow)
1
E
2
C
3
E
4
C
( C : Signal E : No signal)
( C : On-screen signals output
NOTES:
• The on-screen display signals are not output from the video signal MONITOR OUT-2 (yellow) or S-Video signal MONITOR OUT-2 jacks.
• The on-screen display signals are not output from the color difference (component) video signal MONITOR OUT jacks.
• For 4 above, the on-screen display signals are output to the VIDEO MONITOR OUT-1 video signal output jack (yellow) if the monitor TV is
not connected to the S-video MONITOR OUT-1 video signal output jack.
30
Switch to the Auto Preset Memory screen.
Select "Yes" for Start.
"Search" flashes on the screen and searching begins.
"Completed" appears once searching is completed.
The display automatically switches to screen.
At the System Setup Menu, press the SYSTEM SETUP button.
The changed settings are entered and the on-screen display turns off.
Signals input to the AVR-5800
S-video signal input jack
E
E
C
C
E : On-screen signals not output)
On-screen display signal output
VIDEO MONITOR OUT-1 video
signal output jack (yellow)
C
C
E
E
S-video MONITOR OUT-1 video
signal output jack
C
E
C
C