Connecting The Antenna Terminals - Denon AVR-884 Operating Instructions Manual

ENGLISH

Connecting the antenna terminals

DIRECTION OF
BROADCASTING
STATION
75 /ohms
COAXIAL
CABLE
FM ANTENNA
ADAPTER
FM INDOOR
ANTENNA
(Supplied)
AM loop antenna assembly
1 2
Remove the vinyl tie
and take out the
connection line.
4
a. With the antenna
on top any stable
surface.
Mount
b. With the antenna
attached to a
wall.
Installation hole Mount on wall, etc.
Connection of AM antennas
1. Push the 2. Insert the
lever.
14
FM ANTENNA
FEEDER
CABLE
Connect to the AM
antenna terminals.
3
Bend in the reverse
direction.
3. Return the
conductor. lever.
GROUND
Note to CATV system installer:
This reminder is provided to call the CATV system installer's
attention to Article 820-40 of the NEC which provides guidelines
for proper grounding and, in particular, specifies that the cable
ground shall be connected to the grounding system of the
building, as close to the point of cable entry as practical.
Notes:
• Do not connect two FM antennas simultaneously.
• Even if an external AM antenna is used, do not disconnect the
AM loop antenna.
• Make sure AM loop antenna lead terminals do not touch metal
parts of the panel.
AM LOOP
ANTENNA
(Supplied)
AM OUTDOOR
ANTENNA