Denon AVR-5800 Operating Instructions Manual page 36

Multi-source recording/playback
With the exception of the case in [2] below, only the signal connected to the analog input jacks are output from the REC OUT and multi-room
output jacks.
[1] Playing one source while recording another (REC OUT mode)
1 Press the REC/M-ZONE 2 button until
"REC OUT SOURCE" appears on the
set's display.
2 Select the source you want to record
appears on the set's display.
• The indicator
program source lights.
3 Set the recording mode.
• For operating instructions, refer to the manual of the
component on which you want to record.
4 To cancel, press the REC/M-ZONE 2
button twice.
[2] Recording Dolby Digital and DTS multichannel sources
• With this set it is possible to record Dolby Digital and DTS
multichannel signals converted into 2-channel analog signals.
• The recording signals are output to the MULTI ZONE-2 OUT,
TAPE and VCR output terminals.
1 Press the REC/M-ZONE 2 button until
"REC OUT SOURCE" appears on the
display.
2 Set the input mode according to the
source to be played.
3 Set the surround mode by pressing the DIRECT or STEREO
button.
• The multichannel digital signals are down-mixed and output
to the TAPE and VCR output terminals.
STEREO
or
(Main unit)
4 Set the recording mode.
36
REC /
M-ZONE 2
(Main unit)
FUNCTION
for the selected
(Main unit)
REC /
M-ZONE 2
(Main unit)
REC /
M-ZONE 2
(Main unit)
INPUT
MODE
(Main unit)
or
(Remote control unit)
1, 2
Display
PHONO CD TUNER AUX DVD /
VCR -1 -2
NOTES:
• Recording sources other than digital inputs selected in the REC
OUT mode are also output to the multi source audio/video
output jacks.
• Digital signals are not output from the MULTI ZONE 1 audio
output jacks.
1, 4 2
2
VDP TV / DBS
V.AUX MD / TAPE -1 -2
3
3