Disconnecting The Hard Disk Player From The Computer - Aiwa MUSIC TRANSFER Operating Instructions Manual

Disconnecting the hard disk player from the computer

Disconnect the player from the computer by following necessary steps according to your
computer and the operating system.
Following is the example for Windows XP users.
1
Double-click
"Safely Remove Hardware" (Windows XP)/"Unplug or Eject Hardware" (Windows 2000/
Windows Millennium Edition) window appears.
2
Click and select [USB Mass Storage Device], and then click [Stop].
"Stop a Hardware device" window appears.
3
Click and select [USB Mass Storage Device], and then click [OK].
The message "The 'USB Mass Storage Device' device can now be safely removed from
the system." appears.
4
Click [Close] and disconnect the player from your computer.
The player will restart when it is disconnected from the computer.
Turn off the power of the player if you are not to use the player right after disconnection.
Note
If the "safe removal" of the player ends unsuccessfully, refer to "You cannot perform the safe removal
procedure to disconnect the player from the computer." (page 28) in "Troubleshooting."
20 GB
in the Windows Task bar.