Aiwa MUSIC TRANSFER Operating Instructions Manual page 11

2
Connect the player to your computer.
Connect the player to the USB port on your computer using the supplied USB cable.
If the player is not recognized, reconnect the player or connect it to another USB port.
USB
Note
Connect the AC power adaptor to the player when connecting the player to your computer.
If the player is operated on the built-in rechargeable battery and the battery becomes exhausted while
sending, files and data being sent may be destructed.
3
Start Music Transfer Hard Disk Player Edition.
Do one of the following:
• Double-click the desktop icon of Music Transfer Hard Disk Player Edition.
• Click [start] - [All Programs] (or [Programs]) - [Music Transfer Hard Disk Player
Edition] - [Music Transfer Hard Disk Player Edition].
Music Transfer Hard Disk Player Edition starts up and the main window appears.
MP3 files already sent and stored in the player are displayed in the Playlist window.
If the Playlist window does not show the latest information on your player, click [View] -
[Refresh].
Notes
• Do not disconnect the USB cable while Music Transfer Hard Disk Player Edition is running.
• Depending on the setting made on the computer, a window may open. If this happens, click
top-right corner of the window to close it.
Hard Disk
Player
at the
(Continued)
11 GB