Related Manuals for Satec EM133-SE
Summarization of Contents
Chapter 1 General Information
1.1 Features
Details the comprehensive capabilities of the EM13X Series multifunctional power meter.
1.2 Available Options
Lists optional expansion modules for enhanced functionality like I/O, Ethernet, and communication ports.
1.3 Customized Options
Explains how data presentation on display and via communications can be tailored.
1.4 Measured Parameters
Enlists all parameters measured and displayed by the EM13X Series meter.
Chapter 2 Installation
2.1 Site Requirements
Outlines environmental and electrical requirements for proper meter installation.
2.3 Mechanical Installation
Covers methods for physically installing the EM13X Series unit.
2.4 Electrical Installation
Provides essential instructions and guidelines for wiring the meter correctly.
2.5 Battery Replacement
Instructions for replacing the RTC battery backup unit.
2.7 Communications Connections
Details how to connect various communication modules and ports to the meter.
Chapter 3 Using Front Display
3.1 Display Operations
Explains how to navigate and interact with the meter's front panel display.
3.2 Data Displays
Lists and describes the various data displays available on the EM13X Series meter.
3.3 Programming Mode
Guides users on entering and navigating the meter's programming menus.
Chapter 5 Configuring the EM13X Series
5.1 Configuring Communications
Details how to set up communication ports like Serial, Ethernet, and GPRS.
5.2 General Meter Setup
Covers essential meter configurations for electrical network parameters.
5.3 Configuring Meter Security
Explains how to change user passwords and manage security settings.
5.6 Configuring Communication Protocols
Explains how to customize protocol options like Modbus and DNP3.
Chapter 6 Device Control and Upgrading
6.1 Resetting Accumulators, Maximum Values and Files
How to reset meter data, demands, logs, and counters.
6.2 Updating the Meter Clock
Procedures for setting and synchronizing the meter's internal clock.
6.6 Upgrading Device Firmware
Steps for downloading and installing new firmware to the meter via PAS.
Chapter 7 Monitoring Meters
7.1 Viewing Real-time Data
How to retrieve and view live measurement data from the meter.
7.3 Viewing Real-time Waveforms
Guides on capturing and analyzing voltage and current waveforms.
7.4 Viewing Real-time Harmonic Spectrum
Details on retrieving and analyzing harmonic spectrum data.
Appendix A Technical Specifications
A.1 Environmental Conditions
Specifies operating and storage environmental conditions for the meter.
A.5 Input Ratings
Lists detailed voltage and current input rating specifications for all models.
A.9 Communication Ports
Describes the specifications for all available communication ports.
Need help?
Do you have a question about the EM133-SE and is the answer not in the manual?
Questions and answers