Related Manuals for HID FARGO DTCII
Summarization of Contents
Chapter 1: Specifications
1.1 Regulatory Compliance
Details on UL, CSA, FCC, CE, and other agency listings for compliance.
1.2 Safety Messages
Crucial safety instructions and warnings for operating the printer safely.
1.3 Technical Specifications
Covers print method, resolution, colors, ribbon options, speed, and card compatibility.
1.4 Functional Specifications
Explains the printer's core printing technologies and capabilities.
1.5 Printer Components: Print Ribbons
Describes the different types of print ribbons and the coding system used.
1.6 Printer Components: Blank Cards
Information on accepted card types, sizes, surface requirements, and recommended brands.
Chapter 2: Setup and Installation Procedures
2.1 Choosing a Good Location
Guidelines for selecting an optimal location to ensure proper printer performance and prevent issues.
2.2 Unpacking and Inspection
Steps for safely unpacking the printer and verifying all included accessories.
2.3 Installing the Print Ribbon Cartridge
Procedure for installing the one-piece disposable ribbon cartridge correctly.
2.4 Installing Blank Cards into the Input Card Hopper
Guide on how to load blank cards into the printer's input card hopper.
2.5 Card Size Selection
Instructions for setting the correct card size (CR-70/CR-80) in the printer and driver.
2.6 Connecting the Printer Power
Essential steps for safely connecting the printer to its power source.
Chapter 3: Print Driver Installation
3.1 Print Driver Installation
Lists system requirements and supported operating systems for driver installation.
3.2 Driver Installation Instructions
Step-by-step guide for installing the printer driver and associated utility software.
Chapter 4: Printer Preferences
4.1 Card Tab
Options for setting card size, orientation, and accessing utilities like Diagnostics and Toolbox.
4.2 Device Options Tab
Configures printer supplies, dual-sided printing, and other operational options.
4.3 Configuring Fluorescent Data using the Application
Steps for creating fluorescent images via text commands in badge software.
4.4 Image Color Tab
Settings to adjust image quality, color matching, and heat for print output.
4.5 Image Calibrate
Controls the positioning of the print area relative to the card.
4.6 Magnetic Encoding Tab
Configuration options for magnetic stripe encoding processes and standards.
4.7 Overlay / Print Area
Customizes the placement of overlay panels and print areas on the card.
4.8 K Panel Resin Tab
Manages the printing location for the resin black (K) panel on the card.
4.9 Printer Info
Displays details about installed ribbons, card counts, serial numbers, and firmware versions.
Chapter 5: System Overview - Troubleshooting
5.1 Sequence of Operations
Describes the printer's step-by-step operational flow to assist in troubleshooting.
5.2 Troubleshooting
Provides a comprehensive guide to diagnosing and resolving printer issues.
Chapter 6: Firmware Upgrades
6.1 Upgrade Information
Step-by-step instructions for updating the printer's firmware using the FARGO Workbench utility.
Chapter 7: Technical Support
7.1 Reading the Serial Numbers on a FARGO Printer
Guide on how to interpret serial numbers to determine the printer's manufacturing date.
Appendix A: DTCii
A.1 Locking System
Describes the built-in security locks for the DTCii printer's components.
A.2 Accessory Procedures: Using the Security Lock Slot
Instructions on attaching a security cable to the printer's lock slot.
Need help?
Do you have a question about the FARGO DTCII and is the answer not in the manual?
Questions and answers