Setting Custom Size Paper Using The Control Panel - Ricoh Aficio MP W3600 Printer Reference

Setting Custom Size Paper Using the Control Panel

Follow the procedure below to set the machine using the control panel when
loading custom size paper onto the bypass tray.
Important
❒ Paper sizes that can be loaded onto the bypass tray are 257 - 2000 mm (10.12
- 78.74 in.) vertical, and 210 - 914.4 mm (8.27 - 36 in.) horizontal.
❒ The following procedures are not required if you select [Driver / Command]
from [Bypass Tray Setting Priority] in [System] of [Printer Features] (see "Printer
Features", General Settings Guide). In that case, set the paper size using the
printer driver.
❒ If you select [Machine Settings] from [Bypass Tray Setting Priority] in [System] of
[Printer Features] (see "Printer Features", General Settings Guide), the settings
made using the control panel have priority over the printer driver settings.
❒ If the printer driver is not used, select [Machine Settings] from [Bypass Tray Set-
ting Priority] in [System] of [Printer Features] (see "Printer Features", General Set-
tings Guide). Set paper size using the control panel.
A
Press the {User Tools/Counter} key on the control panel.
B
Press [System Settings].
C
Press the [Tray Paper Settings] tab, and then press [Printer Bypass Paper Size].
D
Press [Custom Size].
16
ATW022S