Printing GL/2 and TIFF Files
Using From HDI Driver
Reference
p.117 "Using the HDI Driver for AutoCAD"
Using From the Printing Commands
The following explains printing operations using the "lpr", "rcp", and "ftp"
commands.
Note
❒ Match the data format of the file to be printed with the emulation mode of the
printer.
4
❒ If the message "print requests full" appears, no print jobs can be accepted. Try
again when sessions end. For each command, the amount of possible sessions
is indicated as follows:
• lpr: 5 (When the spool printing function is available: 10)
• rcp, rsh: 5
• ftp: 3
❒ Enter the file name in a format including the path from the directory execut-
ing commands.
lpr
❖ When specifying a printer by IP address
c:> lpr -Sprinter's IP address [-ol] \pass name\file name
❖ When using a host name instead of an IP address
c:> lpr -Sprinter's host name [-ol] \pass name\file name
When printing a binary file, add the "-ol" option (lowercase O, and lowercase L).
When using a printer with the host name "host" to print a PostScript file named
"file 1" located in the "C:PRINT" directory, the command line is as follows:
c:> lpr -Shost -Pfiletype=RPS -ol C:\PRINT\file1
108