Setting The Custom Size Paper Using The Control Panel - Ricoh Type 2500 Printer Reference
Ricoh printer/scanner unit operating instructions
Hide thumbs
Also See for Type 2500:
- Network manual (144 pages) ,
- Scanner reference (136 pages) ,
- Facsimile reference manual (204 pages)
Table of Contents
Advertisement
Reference
See the printer driver Help about the settings from the printer drivers.
Select paper type when printing onto OHP transparencies or thick paper.
For details, see p.16 "Setting Thick Paper or OHP Transparencies Using the
Control Panel".
Select paper type when printing onto envelopes. For details, see p.17 "Set-
ting Envelope Using the Control Panel".
Setting the Custom Size Paper Using the Control Panel
The following procedures are not required if you select the printer driver for the
settings. In that case, set the paper size using the printer driver.
Important
❒ Custom size settings set using the printer driver have priority over those set
using the machine's control panel.
❒ When the printer driver is not used, make settings using the control panel.
A
Press the {User Tools/Counter} key.
B
Select [System Settings] using {T} or {U}, and then press the {OK} key.
C
Select [Tray Paper Settings] using {T} or {U}, and then press the {OK} key.
14
ASC011S
Advertisement
Table of Contents
Need help?
Do you have a question about the Type 2500 and is the answer not in the manual?