Ricoh Aficio MP W3600 Printer Reference page 137

❖ Font
The font attribute selects the font that determines the rendering style. The ta-
ble below shows the character sets that the HP-GL/2 filter can use. If an un-
usable font is specified, the default font is applied.
Font
Courie
Symbol
Zaps Dingbats
User font
Mincho / Gothic
Stick font
Helvetica
Times Roman
Times Bold
Times Italic
Times Bold Italic
Palatino-Roman
Palatino-Bold
Palatino-Italic
Palatino-Bold-Italic
NewCenturySchlBk
NewCenturySchlBk-Bold
NewCenturySchlBk-Italic
Selection condition
The character set is 0, 277 or
the font is 3
The character set is 22, 278
The character set is 300, 332,
364, 396, 428
The character set is 531
The character set is 101, 43,
1000 or a higher number; or
the font is 81, 152, 153, 154,
155, 156
The font is 48, 49, 50
The font is 4
The font is 5 and the line
width is other than 3, 7
The font is 5 and the line
width is 3 or 7
The font is 5, the tilt is 1, and
the line width is other than
3, 7
The font is 5, the tilt is 1, and
the line width is 3, 7
The font is 15 and the line
width is other than 3, 7
The font is 5 and the line
width is 3, 7
The font is 15 and the tilt is 1
The font is 15 and the tilt is 1
and the line width is 3 , 7
The font is 23 and the line
width is other than 3 , 7
The font is 23 and the line
width is 3, 7
The font is 15, the tilt is 1,
and the line width is other
than 3, 7
Printable GL/2 Files
Note
Fonts downloaded using the
DL command.
Conditions of usage by Min-
cho / Gothic depends upon
the command parameter.
4
129