Basic > Defaults > Address Book > Groups; Basic > Security > Account Settings - Kyocera FS C5015N - Color LED Printer Operation Manual

Basic > Defaults > Address Book > Groups
Adding a New Group
1
2
3
4
5
6
Editing a Group
1
2
3
4
Deleting a Group
1
2
3
4
Basic > Security > Account Settings
COMMAND CENTER
This page allows you to add, edit or delete Groups.
Open the Address Book Groups page.
Click Add Group. The Address Book Groups - Add page opens.
Enter the number and name of the group.
Click Submit. The Address Book Groups - Add Members page opens.
Select the members to be added to the created group. Check the members you
want to add. The members must be registered before added.
After you have selected the members, click Submit. The Address Book
Groups - Edit page opens. Click Submit. You can continue editing groups,
such as changing group names and adding or deleting members.
Open the Address Book Groups page.
Click the number or name of the group to edit. The Address Book Groups -
Edit page opens.
You can change the number or name of the group and add or delete members.
To add members, click Add Members and select the addresses to add. Click
Submit. The members must be registered before added.
After you have finished editing, click Submit.
Open the Address Book Groups page.
Check the desired group. When the check box on the left side of Number is
selected, all groups displayed on the page will be checked.
Click Delete Group. The Address Book Groups - Delete page appears. You
can confirm the group to be deleted.
Click Delete when the desired group is selected.
The Administrator (Admin) account is the master access account. It controls
access to the printer and networking configuration from all setup and
management utilities including the HTML web pages. The Admin password set
in the following is valid when Authentication is set to Off. For details on
COMMAND CENTER Pages
3-10