Advanced > Security > Secure Protocols; Advanced > Security > Ieee802.1X - Kyocera FS C5015N - Color LED Printer Operation Manual

COMMAND CENTER Pages
Advanced > Security > Secure Protocols
Advanced > Security > IEEE802.1x
3-51
You can encrypt communication between a PC and this machine using SSL
encryption. For the changes made in the following to take effect, restart the
machine as described in
SSL
Specifies whether or not to use the SSL protocol.
Serverside Settings
• Effective Encryption
Selects the encryption algorithm(s) to be used.
• HTTP Security
Specifies the security level.
• Secure Only (HTTPS)
Encrypts all communication. Access is possible only with a URL that
begins with "https://." Access attempts using an ordinary http:// URL are
automatically redirected to the URL where "http://" is replaced with
"https://."
• Not Secure (HTTPS & HTTP)
Enables access for both encrypted and unencrypted communication.
Access is possible with https:// and http:// URLs. The former URL
establishes encrypted communication and the latter establishes normal
communication.
IPP Security
Specifies the security level.
• Secure Only (IPP over SSL)
Encrypts all communications.
• Not Secure (IPP over SSL&IPP)
Enables access for both encrypted and unencrypted communications.
Clientside Settings
• Effective Encryption
Allow you to specify the encryption algorithm for data communication. You
can use more than one algorithms at a time.
• Certificate Verification
When set On, verify the expiration of the server certificate at communication.
If found expired, communication will fail. When set Off, the expiration will not
be verified.
Note: When the SSL is set to On and HTTP Security is set to Secure
(HTTPS), the document boxes cannot be accessed by the TWAIN driver.
The IEEE802.1x security protocol allows the user to login to the secured
networks based on the client certificates.
IEEE802.1x
Specifies whether or not to use the IEEE802.1x protocol.
Basic > Defaults > Reset on page 3-6.
User Guide