Kyocera FS C5015N - Color LED Printer Operation Manual page 15

COMMAND CENTER
Error Clear Timer
Specifies the time between 5 and 495 seconds after which errors are cleared
automatically.
Low Power Timer
Specifies the time from 1 to 240 minutes after which the system enters the
low power mode, where it reduces the power consumption.
Interrupt Clear Time
This determines the time of period before the machine reverts to normal
mode, after the interrupt copy mode has been engaged. The range is 5 to
459 seconds (in 5-second increments).
WSD Scan Timer
This determines the time of period before the machine reverts to normal
mode, after WSD scan mode has been engaged. The range is 10 to 495
seconds (in 5-second increments).
RAM Disk Mode
Specifies whether to use a part of the print system memory as a RAM disk.
You can specify the size of the print system memory to use for the RAM disk.
If this item is On, electronic sorting is enabled and the printing speed
increases. After you have changed the setting, you must restart the printing
system.
RAM Disk Size
Specifies the size of the RAM disk. For allowable sizes, refer to the print
system operation guide. After you have changed the setting, you must
restart the printing system.
File Name
You can change the file name for the scan data or the job name for the jobs
on the Job page.
Additional Information
You can add a Job Number or the Data and Time to the File Name
designated above. The additional information varies depending on model.
MP Tray Empty
With the MP tray set as the default paper source, this enables (On) or
disables (Off) the paper empty message when the MP tray becomes empty.
Unusable Time Setting
This restricts use of the machine by time of day. When turned On, the
machine becomes unoperative during the time of day specified by Unusable
Time. Except, the received FAXes are stored in the machine and printed
after the unusable time period has been expired.
Unusable Time
This determines the time of period during which the machine is restricted for
use. This is enabled when Unusable Time Setting is On.
Unlock Code
Entering this code, comprised of four digits from 0 to 9, temporarily allows
the machine to be usable during the time of period of restriction.
Dest(ination) Check Before Send
This enables the front panel message which prompts you to confirm the
destination to forward the scan data. The message is displayed when the
machine's Start key is pressed to start scanning.
COMMAND CENTER Pages
3-8