Setting Destinations - Kyocera FS C5015N - Color LED Printer Operation Manual

COMMAND CENTER Pages
2
3
4

Setting Destinations

Addition
1
2
3
4
3-25
The RX/Forward Requirements - Advanced page appears. Specify the
forwarding process. The procedure is almost the same as the procedure for
adding a condition. See steps 2 to 6 as a reference.
Note: The process of saving faxes in a FAX box cannot be selected as the
forwarding process to be applied without using a Requirement List.
After you have finished setting the items, click Submit.
Returns to the RX/Forward Requirements page. Select ALL and click Submit.
This completes the settings for applying the same forwarding process without
using a Requirement list.
When setting Forwarding in Action Settings described above, you have to
register Destination in advance. You can add a new destination or an address
registered in the address book to Destination.
Open the Action Settings > Forward page.
Click Add.
Select the desired type of forwarding process from Address Type. The
available types are as follows:
E-mail
Forwards faxes by E-mail. Specify E-mail address.
SMB
Saves faxes in a shared folder accessible from Microsoft Windows Network.
Specify Host Name, Port Number, Path to the shared folder, Login User
Name, and Login Password.
FTP
Saves faxes on an accessible FTP server. Specify Host Name, Port
Number, Path to the folder, Login User Name, and Login Password.
FAX
Forwards faxes to other FAX machines. Specify FAX Number, Transmit
Start Speed, and other necessary information on the forwarding
destinations.
i-FAX
Forwards faxes to other i-FAX systems. Specify i-FAX Address,
Connection Mode, and other necessary information on the forwarding
destinations.
After you have finished specifying the destination, click Submit.
The Action Settings > Forward page appears. Check that the Destination is
added to the Destination List.
User Guide