Interface Setup - Canon 2163B002 User Manual

Interface Setup

EOP Timer
TCP/IP IP Mode
Protocol
IP Setting
NetWare NetWare
Frame Type
Print Service
AppleTalk
Ethernet Driver Auto Detect
Comm.Mode
Ethernet Type
Spanning Tree
MAC Address
Ext. Interface
Return Defaults
Setting Item
DHCP
BOOTP
RARP
IP Address
Subnet Mask
Default G/W
Description, Instructions
Specify the timeout period before cancellation of
print jobs that cannot be received by the printer.
Choose whether the printer IP address is
congured automatically or a static IP address is
entered manually.
Specify the protocol used to congure the IP
address automatically.
Specify the printer network information when using
a static IP address.
Enter the IP address assigned to the printer, as
well as the network subnet mask and default
gateway.
Specify the NetWare protocol. To apply your
changes, choose Register Setting .
Specify the frame type to use.
Choose the print service.
Specify whether to use the AppleTalk protocol. To
apply your changes, choose Register Setting .
Specify the communication method. To apply your
changes, choose Register Setting .
Choose On for automatic conguration of the
LAN communication protocol. Choose Off to use
settings values of Comm.Mode and Ethernet
Type.
Choose the LAN communication method.
Choose the LAN transfer rate.
Choose whether spanning-tree packets are
supported over the LAN.
Displays the MAC address.
Choose the expansion interface.
Execute? is displayed if you press the ▼ button.
Choose OK to restore the network settings to the
default values.
Control Panel
Printer Parts 55