Cannot print over a NetWare network
The printer's NetWare settings are not congured
correctly.
The computer you are trying to print from is not
congured correctly.
The NetWare server and services are not congured
correctly.
Cause
Corrective Action
Make sure the printer's NetWare settings are
congured correctly. In particular, make sure a valid
frame type is selected. For details, see "Conguring
the Printer's NetWare Network Settings". (→P.625)
Make sure the computer's NetWare settings are
congured correctly. For details, see "Conguring
NetWare Network Settings". (→P.634)
Check the following points.
1.
Make sure the NetWare le server is running.
2.
Make sure there is enough free disk space on the
NetWare le server. Insufcient disk space may
prevent you from processing large print jobs.
3.
Start NWADMIN or PCONSOLE and conrm that
the print service is congured correctly and the
print queue is available.
4.
If data transmission to a printer on another subnet
fails, deactivate NCP burst mode in that printer's
network protocol settings.
5.
If the printer is used in queue server mode, specify
"Other/Unknown" as the printer type.
Cannot print over a network
Troubleshooting 739