Removing The Roll From The Printer - Canon 2163B002 User Manual

Handling rolls

Removing the Roll from the Printer

Caution
•
If you have activated automatic detection of the remaining roll paper, always follow the steps below to
remove rolls. You will be unable to manage the amount of roll paper left if you move the Release Lever
and remove the roll before the barcode is printed.
1.
Press the Load/Eject button.
A conrmation message is displayed regarding removal of the roll.
2.
Press the OK button.
The roll can now be removed.
Note
•
If you need to cut the roll, execute Paper Cutting on the Control Panel. (→P.193)
•
If you have selected Media Menu > Chk Remain.Roll > On in the printer menu and the printed
document has been ejected, a barcode and brief text message are printed on the leading edge of
rolls.
If the document is not cut but kept in the printer, only the text message is printed. In this case,
cut the roll with scissors and remove the sheet.
3.
Open the Top Cover and lift the Ejection Guide.
186 Handling Paper