Specification - Vitek VT-6401 BK Instruction Manual

SPECIFICATION

Temperature measurements
Main block
Remote sensor
Resolution of temperature
measurement
Relative humidity measurement from 20% to 99%
Resolution of relative humidity
measurement
Data transfer from remote
sensor
Data transfer frequency
Number of connected sensors
Range of action
Power supply
Main block
Remote sensor
Attention!
- Because of printing limitations display presented in these instructions may
differ from the actual display in appearance.
- Manufacturer keeps right to change characteristics of the appliances
without any prior
The manufacturer reserves the right to make changes to the characteristics of
the device without prior notice.
The service life of the device is no less than 2 years.
Guarantee
Details regarding guarantee conditions can be obtained from the dealer from
whom the appliance was purchased. The bill of sale or receipt must be produced
when making any claim under the terms of this guarantee.
6401IM.indd 9
announcements.
This product conforms to the EMC-Requirements as
laid down by the Council Directive 89/6/EEC and
to the Low Voltage Regulation (2/7 EEC)
from 0 to +50,0°С
(from +2,0 to +122,0°F)
From -20,0 to +60,0°С
(from -4,0 to +140,0°F)
0,1°С
1%
44 MHz
maximum 
maximum 75 meters (246 feet)
AC adapter 6,0 V DC,
 batteries "AАА" type, 1.5 V
2 batteries "AАА" type, 1.5 V
9
English
07.04.2008 12:35:48