Related Manuals for AddPac AP-GS1002
Summarization of Contents
WEB Connection
Web Connection via Console Port
Guide to connect via console port for IP setup.
Web Connection via LAN 1 Port
Guide to connect via LAN 1 port for web access.
GSM Setup
GSM Dial Plan / Prefix
Setting outgoing call rules for GSM networks using dial plan and prefix.
GSM Extension
Configuration of GSM extensions, including SIM number and callback service.
FXS Extension
Configuration of FXS ports for analog phone connections.
Hotline
Setting up direct incoming and outgoing calls to a predefined number.
VoIP Setup
Protocol (SIP or H.323)
Selection between SIP and H.323 protocols for VoIP communication.
Server SIP
Configuration of the primary and secondary SIP servers for VoIP.
SIP Registration
Registering SIP accounts with authentication details for VoIP service.
Server H.323
Configuration of the primary and secondary H.323 gatekeepers for VoIP.
H.323 Registration
Registering H.323 accounts with authentication numbers for VoIP.
VoIP Dial Plan
Defining dial plan rules for routing VoIP calls based on number conversion.
Static Route
Configuring static routes to forward calls to specific IP addresses.
DTMF/CODEC
Selecting voice codecs and DTMF relay modes for VoIP quality.
Callback Service
WEB Callback Service
Enabling remote calling via web page, requiring whitelist matching.
GSM Callback Service
Allowing mobile users on a whitelist to receive callbacks after disconnecting.
Advanced
Black / White List
Configure lists to reject (blacklist) or allow (whitelist) specific numbers.
LCR(Least Cost Routing)
Implementing Least Cost Routing based on time intervals, tariffs, and simulation.
SMS
Managing SMS messages including inbox, sent, new, and failed messages.
Advanced Service
Gain & CID
Adjusting audio levels and enabling Caller ID display for ports.
GSM Band
Selecting GSM network frequency bands for connectivity.
BTS(Base Terminal Station) -1
Configuring Base Terminal Station (BTS) cell selection methods.
Advanced Service(Etc)
NAT Static Table
Configuring static Network Address Translation rules for port forwarding.
FAX
Configuring FAX mode (T.38, Bypass) and transmit rate.
Service
Enabling and configuring services like Telnet, HTTP, FTP, and call transfer modes.
Security
Configuring security features like IP filtering, digit length limits, and SIP shutdown.
Monitoring
Call Status
Real-time monitoring of GSM G/W port and call connection status.
System Status
Monitoring the overall system status of the GSM G/W device.
GSM Status
Monitoring GSM network status, signal strength, and usage quotas.
Call Log / System Log
Accessing call history and system event logs for troubleshooting.
Ping
Checking network connectivity and status by performing a ping test.
Need help?
Do you have a question about the AP-GS1002 and is the answer not in the manual?
Questions and answers