NETGEAR PS121 - USB Mini Print Server User Manual page 29

Multifunction printer server

Hide thumbs Also See for PS121 - USB Mini Print Server:

Table of Contents

The Add Standard TCP/IP Printer Port Wizard opens. Click Next to open the Add Port

screen shown below:

Figure 2-17

Click Next to proceed. Fill in the IP address you will use for the printer in the Add Port

screen.

Note: For information about viewing the IP address, see

g. Click Finish to proceed. The Add Standard TCP/IP Printer Port Wizard opens.

Figure 2-18

Installation and Setup

NETGEAR USB Multifunction Printer Server PS121v2 User Manual

page

2-3. Also see

"Reserve the Print Server's IP Address on Your Router"

on page

2-5.

v2.0, April 2007

"Installation" on

2-13

Table of Contents

Need help?

Do you have a question about the PS121 - USB Mini Print Server and is the answer not in the manual?

Ps121v2