Table of Contents
Advertisement
EMC and Safety Standards Applied
Product Name:
UB-E02
Model Name:
M155B
The following standards are applied only to the interface boards that are so labeled. (EMC is tested using the EPSON
PS-170 power supply and TM series printers.)
Europe:
North America:
Japan:
Oceania:
The connection of a non-shielded interface cable to this board will invalidate the EMC standards of this device.
You are cautioned that changes or modifications not expressly approved by Seiko Epson Corporation could void your
authority to operate the equipment.
CE Marking
The board conforms to the following Directives and Norms:
Directive 89/336/EEC
The printer in which this board is installed does not conform to the following:
Directive 90/384/EEC
FCC Compliance Statement
For American Users
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in
a residential area is likely to cause harmful interference, in which case the user will be required to correct the
interference at his own expense.
For Canadian Users
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
iv
CE marking
EMI:
FCC/ICES-003 Class A
EMC:
VCCI Class A
EMC:
AS/NZS 3548, CISPR22 Class B
WARNING
EN 55022 Class B
EN 55024
IEC 61000-4-2
IEC 61000-4-3
IEC 61000-4-4
IEC 61000-4-5
IEC 61000-4-6
IEC 61000-4-11
EN45501
Rev. A
Advertisement
Table of Contents
