Epson C32C824151 - UB E02 Print Server Technical Reference Manual page 36

10base-t/100base-tx ethernet interface board

Table of Contents

4. Set the IP address to the UB-E02 using the ping command.

•

Example: ping 192.168.100.201

5. If the ping command is successful, the message "Reply From 192.168.100.201:

Bytes=32Time<10ms TTL=255" is shown. (The time indication will vary.)

6. Check if the IP address shown is 192.168.100.201.

Now, setting the IP address is complete. Next, set the default gateway and Subnet mask for the

UB-E02, referring to the EPSON TMNet WebConfig Functions.

3-12 Utilities

Rev. A

Table of Contents

Ub-e02