Unpacking; Part Names; Functions; Switch - Epson C32C824151 - UB E02 Print Server Technical Reference Manual

2.2 Unpacking

UB-E02
UB-E02 User's Manual

2.3 Part Names

10BASE-T/100BASE-TX
Ethernet interface
connector
Note: This photograph shows the TM-T88III printer with the UB-E02 installed.

2.4 Functions

The switch and LEDs of the UB-E02 provide you with important information on operation and
status of the UB-E02.

2.4.1 Switch

Type: Non-locking push switch
You can do the following with the switch.
Setting initialization
All the parameters of internal settings for the UB-E02 can be set to the factory default values.
See "Initializing UB-E02" on page 6 of this chapter for more details.
Status sheet printing
The internal setting parameters of the UB-E02 can be printed. See "UB-E02 Status Sheet
Printing" on page 6 of this chapter for more details.

2.4.2 LEDs

The UB-E02 has two LEDs.
The green LED is on when the Ethernet link is established.
The yellow LED is on when the printer receiving data.
2-2 Installation
LED (green) LED (yellow) Drawer kick-out
Switch
connector of the printer
Power supply connector
of the printer
Rev. A