Adjusting Pedal Tension; Reinitialization; Reinitialization Of The Mpx R1 - Lexicon MPX R1 - V2 REV User Manual

MPX R1 Version 2 User Guide
Adjusting Pedal
Tension

Reinitialization

Reinitialization of the
MPX R1
Reinitialization of the
MPX G2 or the MPX 1
and the MPX R1
7-2
The tension of the foot pedal can be adjusted tighter or looser according to your
preference. Use a #2 Phillips-head screwdriver to adjust the screw located on
the right side of the pedal (as viewed from the top).
On the MPX R1, press the 0 (ON/OFF 2) button while powering up. When all of
the LEDs begin blinking, release the 0 button and press FX to initialize the foot
controller. (Press any other button to cancel the initialization procedure.) This
will reset all of the MPX R1 parameters to the default states listed in Chapter 4.
On either the MPX G2 or the MPX 1, press System and turn the knob to select
Initialize. Press the > button repeatedly to step to the last selection in the
Initialize menu. The Store button will flash, indicating that the MPX G2 (or
MPX 1) is armed to perform the initialization procedure.
Press System.
Press Yes to initialize. Press any other button to disarm the initialize function.
Press > repeatedly to
get to the last menu
selection.
Press the flashing Store button
to reinitialize the MPX 1 or the
MPX G2 for use with the foot
controller.
Lexicon