Setup Parameters - Lexicon MPX R1 - V2 REV User Manual

MPX R1 Version 2 User Guide

Setup Parameters

6-2
The front panel Yes/+ and No/- buttons allow you to select a Setup number (1-
100) for programming. This number is assigned to the 1/GAIN button.
Each of the MPX R1 front panel buttons numbered 2-9 is now available to
memorize Program Change messages. (Button 0/ON/OFF 2 is available for
storing a relay state.)
Select the button you want (2-9) to designate a particular MIDI device.
MPX R1 Button
2/CHORUS
3/DELAY
4/ON/OFF 1
5/ON/OFF 2
6/REVERB
7/EQ
8/MOD
9/ON/OFF 3
The BANK buttons will now select one of four parameters available to define the
Program Change messages you want to send. The Yes/+ and No/- buttons set
the value for each parameter you select. (Note that the Yes/+ and No/- buttons
have an auto-repeat function which is activated when held down.)
PC (Program Change) lets you select a MIDI Program Change message (0-999)
for the selected device. This parameter is specific to each Setup.
Ch (MIDI Channel) lets you select a MIDI Channel (1-16) for communication with
the selected device. This channel will be used for any devices assigned to this
button. This parameter is global for each device.
PPb (Programs Per Bank) lets you specify the number of programs in each bank
(0-999), and therefore, when a bank change message will be transmitted. This
parameter is global for each device.
bC (Bank Change Message) lets you define the Bank Select message (0, 32 or
032) to be transmitted to the selected device. This parameter is global for each
device.
Once these parameters have been set, you can test the device by pressing
2/CHORUS. This will output all of the MIDI information you have programmed
for the selected device.
Button 0/ON/OFF 2 lets you assign a relay state to be stored with the Setup,
assign Song Select, and assign as many as 16 Controllers and their toggle
states. The BANK buttons select the following five parameters for editing.
rEL (Relay State) The Yes/+ and No/- buttons allow you to select the relay state
you want stored with the Setup (1-4).
SnG (Song Select) lets you store Song Select messages with the Setup. Use
Yes/+ and No/- to select Song messages 0-127.
t (1-16) lets you toggle one of 16 Controllers on or off (0 or 127). Use the BANK
buttons to select Controllers 1-16, and Yes/+ and No/- to toggle the state.
Lexicon
Device 1
Device 2
Device 3
Device 4
Device 5
Device 6
Device 7
Device 8