Lexicon LEXICON480LV4 Owner's Manual page 90

Lexicon 480L Owner's Manual
Program Descriptions
1 The In/Out
A bypass program that feeds an input signal unaltered
through the processors. This program has no adjust-
able parameters.
2 Stereo Adjust
A digital mixing program designed for mastering appli-
cations. The program loads with parameters nulled.
3 PONS Adjust
A variation of Stereo Adjust which incorporates
psychoacousticaly-optimized noise shaping (PONS)
dither.
4 MS Decode
A variation of Stereo Adjust that is preset to decode MS
recordings. The mid signal is fed to the left input, and
side is fed to the right. The Flip & Swap parameter can
reverse the channels if a digital source is used. The
BAL control provicdes the mix ratio of M and S signals.
5 Invert L-R
A variation of Stereo Adjust that has the Flip & Swap
parameter presetwith a digital phase inversion.
8-12
6 Channel Swap
A variation of Stereo Adjust that has the Flip & Swap
parameter preset to swap left and right channel input
signals.
7 Stereo Parametric EQ
2-Band stereo parametric EQ and mixer with param-
eters nulled.
8 60Hz Notch
A variation of Stereo Parametric EQ preset with a 60 Hz
cut.
9 Mono Parametric EQ
4-Band mono parametric EQ and mixer with param-
eters nulled.
0 Panorama
Integral crosstalk cancellation program adds width to
stereo image. Use in cascade configurations with re-
verb or ambience in Machine A, and Panorama in
Machine B.