Lexicon LEXICON480LV4 Owner's Manual page 136

Lexicon 480L Owner's Manual
Understanding Events and Parameters
The system of events and parameters used by the 480 is directly accessible using the automation mode. These
events and parameters have a direct relationship to the events and parameters available from the LARC. Every
parameter and event seen on the LARC can be changed using automation.
The order and relative offset of the parameters and events do not correspond with the parameters displayed on
the LARC. To determine which parameter number is associated with which LARC parameter, experiment with
different parameters and events, record the output with SysEx automation, and examine the results.
As an example, the mono sampling preset has several parameters and events. The LARC displays the following:
MONO 3S
Page 1
Page 2
Page 3
Page 4
Parameters and Events are in separate lists from the automation viewpoint. The parameter list for "Mono 3S" is:
voice
mark
C_trig
shift
ftime
head
rtime
tail
play
repeat
P_trig
holdoff
Some of the parameters are repeated on multiple pages. This list represents just one instance of each parameter.
Events are very similar. As far as the automation is concerned the events are ordered based on an internal
representation. The Larc representation is not predictable. The event list for Mono 3S is:
rec
stop
rcue
overdub
repro
cue
Some of the events are repeated in several places. This list is represents just one instance of each parameter.
In the case of "Mono 3S" all of the events available from the Larc are available from the Automation mode.
A-12
- REC
DUB REC
HED TIM
PLAY RP
Larc: NA
Larc: Page 1 Slider 3
Larc: Page 1 Slider 4
Larc: NA
Larc: Page 3 Slider 2
Larc: Page 3 Slider 1
Larc: NA
Larc: NA
Larc: Page 2 Slider 3
Larc: Page 4 Slider 2
Larc: Page 4 Slider 3
Larc: Page 4 Slider 4
Larc: Page 1 Button 2
Larc: Page 1 Button 5
Larc: Page 1 Button 6
Larc: Page 2 Button 1
Larc: Page 4 Button 1
Larc: Page 3 Button 6
MARK MODE
FAD MODE
- -
TLV HOLD
Automation: Parameter: 0
Automation: Parameter: 1
Automation: Parameter: 2
Automation: Parameter: 3
Automation: Parameter: 4
Automation: Parameter: 5
Automation: Parameter: 6
Automation: Parameter: 7
Automation: Parameter: 8
Automation: Parameter: 9
Automation: Parameter: 10
Automation: Parameter: 12
Automation: Event: 1
Automation: Event: 2
Automation: Event: 3
Automation: Event: 4
Automation: Event: 5
Automation: Event: 6
CAP CHK
CAP CHK
FAD CUE
- CUE